1962 Jaguar E-Type Coupé 3.8L series I Low Drag Style Coupe SOLD
See all the Images for this Car
One of the greatest post-war sports cars, Jaguar's E-Type caused a sensation on its Geneva Show debut, with all the promise of its looks confirmed by a 150mph top speed and 0-60mph and 0-100mph in 6.9 and 16.2 seconds respectively; fast indeed, and combined with superb roadholding and remarkable docility. There is a Heritage Certificate that confirms that this car was manufactured on the 22 January 1962, chassis number 860182, a silver/grey 3.8 litre fixedhead coupe right-hand drive E-Type Jaguar. It was used for club racing throughout the 1970's and 80's finishing up as a fairly extreme 'modsports' special.
In 1995, it was purchased from Fred Cliffe, a respected E-Type racer, in component form, but with all the mechanical components totally rebuilt ready for installation. Simon Dunford, who worked at Lynx, on the restoration of the actual Lindor/Wocker Low drag coupe was commissioned to build a replica after he had started his own company in 1998. Apart from the floorplan and bulkhead. The car is all aluminium assembled exactly as the original car with even the side windows made of plexiglass. The front frames were all replaced and were especially strengthened for competition. All the final preparation of the car was carried out by Beacon Hill Garage at Hindhead who themselves were racing a similar car. There are two sets of peg drive Dunlop magnesium wheels and spinners, one set has Dunlop 'M' section CR65 racing tyres with the other shod with road tyres. The discs are ventilated and fitted on appropriate bells for competition. Brake balance can be accessed via a knob on the dashboard and all lines are 'Aeroquip'. The suspension set-up was undertaken by Beacon Hill with the rear made up with 350lb roadspring special bottom wishbones and AVO adjustable shock absorbers. The front consists of competition anti-roll bar with competition torsion bars and adjustable Koni shock absorbers. The differential was rebuilt to 3.54 limited slip spec. and the gearbox is all synchro, close ratio rebuilt by Dave Butcher of DJB Engineering with the steering rack also to comp spec. DJB Engineering were also responsible for the engine. A total rebuild included a fully ported big valve head with special springs and racing camshafts. The inlet manifold was developed in the 1960's with triple twin choke Weber carburetors. Mike the Pipe fashioned the exhaust and the pistons (9:1) Tuf rided and peened rods and crank. The engine has been given a rolling road figure of 300bhp. OSL 828 has been completely rewired with all instrument overhauled with the addition of a new high torque starter. There is also a 'Terratrip' trip computer installed, giving accurate time and distance readings. A new 2-speed Kenlowe suction fan is attached to the re-cored radiator, a Lynx oil cooler kit with braided pipes and 32 row oil cooler and ally header tank. The fuel tank is an aluminium foam filled unit with appropriate filler cap and Facet electric fuel pump. Internally, the cockpit has been retrimed in black with grey roof lining, high side bucket seats by Corbeau and Sparco with multi-point Willens safety harnesses. Further safety features include a master switch and fire extinguisher (fully primed) and a braced rollover bar is fitted. A big cat in wolfs clothing.

Reference Number 654

as of 6/7/2006

Overview
Car 1962 Jaguar E-Type Coupé 3.8L series I Low Drag Style Coupe
VIN 860182 
Exterior / Interior Color      Green 
Registration OSL 828 (GB) 
Configuration Right Hand Drive (RHD) 
Options Exterior: Alloy rims, Metallic paint 
More Images
See all the Images for this CarSee all the Images for this CarSee all the Images for this CarSee all the Images for this CarSee all the Images for this CarSee all the Images for this Car